Portable/Rechargeable UVC Sterilizing/Disinfecting Box. Please charge your unit before first use. Recommended USB Charger to use: 5V 2.0A

The box emits powerful UVC ultraviolet light to thoroughly clean the items you place inside. In approximately 3 minutes, it can kill up to 99.9% of germs and bacteria. UVC radiation effectively eliminates bacteria, viruses, and other pathogens that could contaminate your tools, reducing the risk of infection for your clients. 

This box is suitable for disinfecting e-file bits, nippers, scissors, pushers and tweezers - any dry, non-porous implement/tool. With reflective base ensuring proper radiation of your implements. 

 

HOW TO USE

  1. Start by cleaning/sanitising your tools/implements/bits and drying them thoroughly.
  2. Disinfect your tools/implements/bits with your chosen disinfectant for the relevant time - following the manufacturer's instructions carefully.
  3. Dry your tools/implements/bits thoroughly before placing them in the box. Close the lid of the box firmly. The lights inside the box will not turn on if the lid is open.
  4. Turn the unit on (botton on the front side next to the USB-C port- slide to the right)
  5. Press the 3min botton on top of the unit to start the process.
  6. The process will be complete in around 3 minutes and the indicator light will show progress. If the box is opened during the process the lights will automatically switch off for safety. 

When the battery reaches 20% or below the timer indicator light will turn from blue to red. Please charge the unit. During charging the timer indicator lights will cycle from 25% up to 100%. Once fully charged the cycling will stop and just be a steady blue light. 

Please always switch the unit off by sliding the botton found at the front of the unit to the left, whenever the unit isn't being used. This will prolong the battery life of your unit. 

 

Cleaning & Maintenance

Caution:

Clean the appliance immediately after every use.
Do not immerse the unit into water or pour water directly into the unit.
Do not use bleaching or chemical solution tablets in the appliance.
Do not use steel wool, abrasive cleaners or corrosive liquids (such as acetone, polish remover, nail cleaners containing solvents) to clean the appliance.

 

Cleaning Method:

1. Turn off the unit and unplug the USB-C cord.

2. Open the cover/lid.

3. Remove the accessories stand.

4. Wipe the product with a paper towel and The One Spray. Allow evaporation of The One before closing the lid.

 

Note:

There may be residual heat after use. Allow the unit to cool down completely before cleaning. Never touch the UV LED's whilst still warm as this can lead to damage and them no longer working. 

 

WARNING: FOR PROFESSIONAL USE ONLY. Keep out of reach of Children. Do not place damp items, or items unsuitable for sterilisation in the unit.

Made in China

(TPSB01)

Others Also Bought